6mm x 10m x 0.1mm Roll

Image shows a generic spares kit.

The post Element Wire 6mm 10m roll appeared first on PackSealer.

Star ARTICS Controller (Advanced Real Time Impulse Control System)
Touch Screen Controller
Optional on S66 S96 S106 machines.

• Weld and cool temperatures measured to the nearest 1°C and 1/10th of a second
• Touch Screen Controller
• Preheat temperature for the element when not in use
• Membrane keypad with Multi Line LCD display and LED indicators
• All settings protected with multi-level passwords
• Set alarms for temperature deviation during the weld cycle
• Built in adjustable jaws closing timeout alarm for operator safety
• Timed vacuum and gas flush cycle on Medical Vacuum Sealer
• Alphanumeric error reporting on the display with audible signal
• Power to the elements and jaws closed actuator cut in any error state
• Store up to 10 pre-set programmes with an alphanumeric name
• Built in batch counter

Also available for the S-Medical machines, please contact us for prices.

The post Star ARTICS Upgrade Advanced Vacuum Time & Temperature Touch Screen appeared first on PackSealer.

3mm x 10m x 0.1mm Roll

Image shows a generic spares kit.

Suitable for Hulme Martin, Star Universal and Audion (038202) machines.

The post Element Wire 3mm 10m roll appeared first on PackSealer.

The machine body can be built in a number of different designs with the jaws operating vertically (when a product is best sealed laying down) or horizontally (when a product is best sealed standing up). With cylinders moving the top jaw directly, jaw alignment and pressure are much more controllable. With minimal moving parts the Star Medical sealer risks producing no dust particles, unlike continuous rotary style machines, making it ideal for cleanroom operation.

These bag sealing machines are available with all the Star controllers, allowing a wide range of materials to be sealed including polythene bags, laminate ‘stand up’ pouches and PU coated fabrics. With the ARTICS or Medical controller peelable seals can be produced on medical pouch materials such as Tyvek®.

The Star Medical Vacuum pouch sealer allows for the air to be removed from a bag prior to sealing. The machine is available with a range of vacuum pumps or vacuum generators, dependant on your application. Gas flushing is available for modified atmosphere packaging, with multiple vacuum and gas flush cycling available on either timed or measured vacuum and gas levels.

Seal Length:        800mm
Seal Width:           9mm
Jaw Opening:       50mm standard, 25-200mm options
Max Material Thickness:     Over 1000μm (4000g)
Sealing Cycle Time:        Typically 4 – 20s Seal Only, 15 – 45s Vacuum Seal
Power Supply:        230V 50/60hZ Single Phase, 115V Optional
Average Power Consumption / Cycle:        0.01 – 0.03kWh
Average Power:        Weld 1730W, Cool 125W, Standby 250W
Air Supply:        6 – 8 bar Clean Dry Air
Air Consumption / Cycle:        0.525 – 3.5 NI at 6 bar

Medical Vacuum Sealer Optional Stainless Steel Stands

• Horizontal stand
• Vertical stand
• Stainless Steel Support Tray

Other options for the 800mm Star Medical Vacuum Sealer – Please contact us for pricing:

• Mk3 Star Medical Seal touch screen Cycle Controller
• Data logging (Mk3 only)
• Built in printer for printing seal cycle data (Mk3 only)
• Remote access to power pack via CAT 5 (Mk3 only)
• Electronic Weld Pressure Control
• Twin Panel Push Button Cycle Start with safety relay
• Manual Safety Cutter
• Automatic Cutter
• Parallel Weld for Single Transformer Jaws
• Twin Channel Temperature Control Medical only (For parallel weld machines)
• Air or Water Cooled Jaws
• 115V Operation
• Upgrade to TL10 Vacuum Pump (10 m³/h) Externally Mounted
• Upgrade to TL15 Vacuum Pump (16C m³/h) Externally Mounted
• Gas Flushing
• Data Upload Program
• Calibration Certification for Temperature and Pressure
• On Site Calibration for Temperature and Pressure

This Heat Sealer is configured to order so please contact PackSealer for stock lead time and delivery.

Contact Us

View video in YOU TUBE     PackSealer YouTube Channel

The post Star 800mm x 10mm ARTICS Vacuum Sealer with Filter appeared first on PackSealer.

Technical Specification

The post Pneumatic Air Compressor appeared first on PackSealer.

The machine body can be built in a number of different designs with the jaws operating vertically (when a product is best sealed laying down) or horizontally (when a product is best sealed standing up). With cylinders moving the top jaw directly, jaw alignment and pressure are much more controllable. With minimal moving parts the Star Medical sealer risks producing no dust particles, unlike continuous rotary style machines, making it ideal for cleanroom operation.

These bag sealing machines are available with all the Star controllers, allowing a wide range of materials to be sealed including polythene bags, laminate ‘stand up’ pouches and PU coated fabrics. With the ARTICS or Medical controller peelable seals can be produced on medical pouch materials such as Tyvek®.

The Star Medical Vacuum pouch sealer allows for the air to be removed from a bag prior to sealing. The machine is available with a range of vacuum pumps or vacuum generators, dependant on your application. Gas flushing is available for modified atmosphere packaging, with multiple vacuum and gas flush cycling available on either timed or measured vacuum and gas levels.

Seal Length:        800mm
Seal Width:           9mm
Jaw Opening:       50mm standard, 25-200mm options
Max Material Thickness:     Over 1000μm (4000g)
Sealing Cycle Time:        Typically 4 – 20s Seal Only, 15 – 45s Vacuum Seal
Power Supply:        230V 50/60hZ Single Phase, 115V Optional
Average Power Consumption / Cycle:        0.01 – 0.03kWh
Average Power:        Weld 1730W, Cool 125W, Standby 250W
Air Supply:        6 – 8 bar Clean Dry Air
Air Consumption / Cycle:        0.525 – 3.5 NI at 6 bar

Medical Vacuum Sealer Optional Stainless Steel Stands

• Horizontal stand
• Vertical stand
• Stainless Steel Support Tray

Other options for the 800mm Star Medical Vacuum Sealer – Please contact us for pricing:

• Mk3 Star Medical Seal touch screen Cycle Controller
• Data logging (Mk3 only)
• Built in printer for printing seal cycle data (Mk3 only)
• Remote access to power pack via CAT 5 (Mk3 only)
• Electronic Weld Pressure Control
• Twin Panel Push Button Cycle Start with safety relay
• Manual Safety Cutter
• Automatic Cutter
• Parallel Weld for Single Transformer Jaws
• Twin Channel Temperature Control Medical only (For parallel weld machines)
• Air or Water Cooled Jaws
• 115V Operation
• Upgrade to TL10 Vacuum Pump (10 m³/h) Externally Mounted
• Upgrade to TL15 Vacuum Pump (16C m³/h) Externally Mounted
• Gas Flushing
• Data Upload Program
• Calibration Certification for Temperature and Pressure
• On Site Calibration for Temperature and Pressure

This Heat Sealer is configured to order so please contact PackSealer for stock lead time and delivery.

Contact Us

View video in YOU TUBE     PackSealer YouTube Channel

The post Star 800mm Medical Vacuum Sealer appeared first on PackSealer.

The machine body can be built in a number of different designs with the jaws operating vertically (when a product is best sealed laying down) or horizontally (when a product is best sealed standing up). With cylinders moving the top jaw directly, jaw alignment and pressure are much more controllable. With minimal moving parts the Star Medical sealer risks producing no dust particles, unlike continuous rotary style machines, making it ideal for cleanroom operation.

These bag sealing machines are available with all the Star controllers, allowing a wide range of materials to be sealed including polythene bags, laminate ‘stand up’ pouches and PU coated fabrics. With the ARTICS or Medical controller peelable seals can be produced on medical pouch materials such as Tyvek®.

The Star Medical Vacuum pouch sealer allows for the air to be removed from a bag prior to sealing. The machine is available with a range of vacuum pumps or vacuum generators, dependant on your application. Gas flushing is available for modified atmosphere packaging, with multiple vacuum and gas flush cycling available on either timed or measured vacuum and gas levels.

Seal Length:        1020mm
Seal Width:           9mm
Jaw Opening:       50mm standard, 25-200mm options
Max Material Thickness:     Over 1000μm (4000g)
Sealing Cycle Time:        Typically 4 – 20s Seal Only, 15 – 45s Vacuum Seal
Power Supply:        230V 50/60hZ Single Phase, 115V Optional
Average Power Consumption / Cycle:        0.01 – 0.03kWh
Average Power:        Weld 1730W, Cool 125W, Standby 250W
Air Supply:        6 – 8 bar Clean Dry Air
Air Consumption / Cycle:        0.525 – 3.5 NI at 6 bar

Medical Vacuum Sealer Optional Stainless Steel Stands

• Horizontal stand
• Vertical stand
• Stainless Steel Support Tray

Other options for the Star Medical Vacuum Sealer – Please contact us for pricing:

• Mk3 Star Medical Seal touch screen Cycle Controller
• Data logging (Mk3 only)
• Built in printer for printing seal cycle data (Mk3 only)
• Remote access to power pack via CAT 5 (Mk3 only)
• Electronic Weld Pressure Control
• Twin Panel Push Button Cycle Start with safety relay
• Manual Safety Cutter
• Automatic Cutter
• Parallel Weld for Single Transformer Jaws
• Twin Channel Temperature Control Medical only (For parallel weld machines)
• Air or Water Cooled Jaws
• 115V Operation
• Upgrade to TL10 Vacuum Pump (10 m³/h) Externally Mounted
• Upgrade to TL15 Vacuum Pump (16C m³/h) Externally Mounted
• Gas Flushing
• Data Upload Program
• Calibration Certification for Temperature and Pressure
• On Site Calibration for Temperature and Pressure

This Heat Sealer is configured to order so please contact PackSealer for stock lead time and delivery.

Contact Us

View video in YOU TUBE     PackSealer YouTube Channel

The post Star Medical Vacuum Sealer 1020mm appeared first on PackSealer.

Watch on Youtube

Also check out the Star 66 S66

https://www.packsealer.co.uk/heat-sealers/star-66-vertical-heat-sealer/

All Star heat sealers can be fitted with a range of control options.

The process of impulse heat sealing involves heating the material being sealed beyond its melt point, pressing the two layers together then cooling it to produce a solid seal. The more control over the weld temperature, weld time and cooling temperature the better and more consistent the weld produced. Welds produced without enough heat or time can look sealed but may separate if pressure is applied. Welds produced without enough cooling appear to be molten and are weaker than a weld that has been allowed to cool under pressure properly. Welds produced without enough pressure may separate easily or appear molten even if enough heat and cool are used. To prevent unauthorised alteration of the sealing parameters the MkVI and MkVI C controllers come complete with a built in keypad lock. The Star ARTICS and Medical controllers have multi level pass code protection to aid with validation process control.

Star bag sealers and vacuum sealers offer you the option of four different controllers which are available on most of our machine range. The MkVI controller is fitted as standard (with the exception of the Medical Vacuum Sealer). Like most impulse sealers, this uses a weld and cool time (the element heats up for the weld time and is off for the cool time). Unlike most other heat sealers the weld and cool times are displayed to the nearest 1/10th of a second and the controller includes a heat build up compensation program.

The MkVI C allows the weld and cool temperature to be set. This allows it to automatically adjust for problems with heat build up. The element heats up until it reaches the weld temperature, then is turned off. The jaws open once the cool temperature is reached, allowing the material being sealed to set properly before release.

The Star ARTICS controller takes the level of control even further. The heating element heats up to the weld temperature and holds the set temperature for a set time. It then cools the element to a temperature or time, dependent on application. There is also a preheat option so the machine heats the element to a set temperature when not in use. When fitted to a Medical Vacuum machine the ARTICS controller also controls the vacuum and gas flush times.

The Star Medical controller has the same features as the ARTICS controller, with the additional features of measuring and controlling the weld pressure, independent second temperature control (if a second element is used) and seal cycle data storage for upload to a computer. When fitted to the Medical Vacuum Sealer the Star Medical controller also measures and controls the vacuum and gas flush levels in mBar.

Star MkVI Controller
Fitted as standard to most machines

Weld and cool timed to the nearest 1/10th of a second
Membrane keypad with LCD display and LED indicators
Keypad can be locked to prevent unauthorised alteration
Programmable heat compensation built in to reduce weld time during rapid and repeated operation
Built in adjustable jaws closing timeout alarm for operator safety
Coded error reporting on the display
Power to the elements and jaws closed actuator cut in any error state

MkVI C Controller
Optional on most machines

Weld and cool temperatures measured to the nearest 1°C
Membrane keypad with LCD display and LED indicators
Keypad can be locked to prevent unauthorised alteration
Automatically compensates for heat build up during rapid and repeated operation
Built in adjustable jaws closing timeout alarm for operator safety
Coded error reporting on the display
Power to the elements and jaws closed actuator cut in any error state

Star ARTICS Controller (Advanced Real Time Impulse Control System)
Optional on most machines

Weld and cool temperatures measured to the nearest 1°C and 1/10th of a second
Preheat temperature for the element when not in use
Membrane keypad with Multi Line LCD display and LED indicators
All settings protected with multi-level passwords
Alarms can be set for temperature deviation during the weld cycle
Built in adjustable jaws closing timeout alarm for operator safety
Timed vacuum and gas flush cycle on Medical Vacuum Sealer
Alphanumeric error reporting on the display with audible signal
Power to the elements and jaws closed actuator cut in any error state
Up to 10 preset programs can be stored with an alphanumeric name
Built in batch counter

Star Medical Controller
Optional on pneumatically operated machines

The Star Medical controller comes with all the features of the ARTICS controller plus:

Twin channel temperature control for a second element
Sealing pressure monitoring with alarm parameters
Weld pressure can be controlled electronically
Vacuum and gas flush level monitored in mBar
Seal cycle data recording and stored for upload onto a computer

The post S101 Vertical Commercial Vacuum Sealer appeared first on PackSealer.

Star ARTICS Controller (Advanced Real Time Impulse Control System)
Optional on S66 S96 S106 machines.

• Weld and cool temperatures measured to the nearest 1°C and 1/10th of a second
• Preheat temperature for the element when not in use
• Membrane keypad with Multi Line LCD display and LED indicators
• All settings protected with multi-level passwords
• Set alarms for temperature deviation during the weld cycle
• Built in adjustable jaws closing timeout alarm for operator safety
• Timed vacuum and gas flush cycle on Medical Vacuum Sealer
• Alphanumeric error reporting on the display with audible signal
• Power to the elements and jaws closed actuator cut in any error state
• Store up to 10 pre-set programmes with an alphanumeric name
• Built in batch counter

Also available for the S-Medical machines, please contact us for prices.

The post Star ARTICS Controller Upgrade Advanced Vacuum Time & Temperature appeared first on PackSealer.

The MkVI C has weld and cool control to the nearest °C.  Adjustment can be made by the keypad with an LCD readout of the settings. The keys can also be locked to prevent unauthorised alteration.

The post Star MkVI C Controller Upgrade appeared first on PackSealer.