Pedestal mounted Automatic Double Foot Pedal Heavy Duty Heat Foot Sealer with foot switch, working height 900mm.

The heavy duty heat sealer stand will take the weight of larger bags and sacks

Switch operated Foot Sealers provide a faster hands free sealing operation. Supplied with Heavy Duty stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge).

Approximately up to 10 packages can be sealed per minute. In automatic mode the sealer will close at pre-set intervals without the need to press the foot switch.

Power 2000w, Weight 55kg

Watch the video in YouTube

Impulse Heat Sealers

Impulse heat sealers are one of the most common types of heat sealers. These have one or two heating elements which are covered by a layer of PTFE or Teflon® fabric type material which prevents the bag sticking to the sealer. The heating elements are not continuously heated; heat is only generated only when the jaws are closed and current flows. When the bag is placed in the impulse heat sealer, the jaws are closed and pressure maintained for the time of the seal then pressure is held for a preset time to allow the seal to cool and to create a good seal.

Foot Operated Impulse Sealers

Foot sealers are great for low-medium usage because they allow sealing to be operated with hands free to aid lifting or positioning your product. Most come with a floor stand and the working height is around 80cm so the operator can stand up or sit down. The seal width is wider than the hand sealers at 5mm giving a more aesthetic finish.

Double Foot Impulse Sealers (X2)

This heavy duty foot sealer has a heating element on both the top and bottom jaws which makes these sealers suitable for thicker material. 150µ to 250µ (600 to 1000 gauge) and some foil pouches or bags, or for bags with a side gusset

The post Heavy Duty Heat Sealer 450mm Automatic Double Heat Impulse Sealer appeared first on PackSealer.

Pedestal mounted Automatic Double Foot Pedal Heavy Duty Heat Foot Sealer with foot switch, working height 900mm.

The heavy duty stand will take the weight of larger bags and sacks

Switch operated Foot Sealers provide a faster hands free sealing operation. Supplied with Heavy Duty stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge).

Approximately up to 10 packages can be sealed per minute. In automatic mode the sealer will close at pre-set intervals without the need to press the foot switch.

Power 2000w, Weight 55kg

Watch the video in YouTube

Impulse Heat Sealers

Impulse heat sealers are one of the most common types of heat sealers. These have one or two heating elements which are covered by a layer of PTFE or Teflon® fabric type material which prevents the bag sticking to the sealer. The heating elements are not continuously heated; heat is only generated only when the jaws are closed and current flows. When the bag is placed in the impulse heat sealer, the jaws are closed and pressure maintained for the time of the seal then pressure is held for a preset time to allow the seal to cool and to create a good seal.

Foot Operated Impulse Sealers

Foot sealers are great for low-medium usage because they allow sealing to be operated with hands free to aid lifting or positioning your product. Most come with a floor stand and the working height is around 80cm so the operator can stand up or sit down. The seal width is wider than the hand sealers at 5mm giving a more aesthetic finish.

Double Foot Impulse Sealers (X2)

This heavy duty foot sealer has a heating element on both the top and bottom jaws which makes these sealers suitable for thicker material. 150µ to 250µ (600 to 1000 gauge) and some foil pouches or bags, or for bags with a side gusset

The post Heavy Duty Heat Sealer 600mm Automatic Double Heat Impulse Sealer appeared first on PackSealer.

Pedestal mounted automatic foot pedal sealer with foot switch, working height 870mm.  The pillar can be shortened for mounting on a bench top. Foot Switch Sealers provide a faster hands free sealing operation.

Supplied with stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge).

Approximately up to 10 packages can be sealed per minute. In automatic mode the sealer will close at preset intervals without the need to press the foot switch.

This sealer can be easily converted into a bench sealer buy purchasing a short stand tube.
Power 1500w, Weight 35kg

Important note.

A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.

This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).

More information about Circuit Breakers

The post 600mm Automatic Foot Pedal Sealer appeared first on PackSealer.

In automatic mode the sealer will close at preset intervals without the need to press the foot switch.

Picture is for information and shows the similar single heat option.

The seal width is 5mm, however a 8mm conversion is available.

To ensure that you have continued products a maintenance kit is a good optional addition.

The vertical sealer comes with a heavy duty support stand and adjustable product support tray.

Power 1500w, Weight 55kg

The PSV range of heavy duty sealers are delivered on a pallet. Weight 50kg.

Important note.

When sealing the initial load creates a spike in demand for a fraction of a second that can trip the electrical breaker.  This type of spike is common with motors when they start up. We recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

A B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip.  This heat sealer can go over the 20amp (B20) for more than 100 milliseconds but not over 32 amp (B32).

The post 600mm Vertical Heat Sealer Automatic Double Foot Pedal Operated appeared first on PackSealer.

Size:

450mm Length x 5mm Seal width, upper and lower sealing element for heavy duty bags.

Adjustable working height from 700mm to 900mm with an adjustable support shelf.

The 450mm vertical heat sealer is suitable for sealing bags that are required to kept upright, for instance; sacks for flowable product like liquids and powders or powders and bulky materials like gravel, aggregates or firewood.
Foot Switch Sealers provide a faster hands free sealing operation.
Supplied with stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification. The sealer incorporates an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 250μ (2 x 1000 gauge). Approximately up to 8 packages can be sealed per minute.

In automatic mode the sealer will close at preset intervals without the need to press the foot switch.

Options:

The seal width is 5mm, however a 8mm conversion is available.

To ensure that you have continued products a maintenance kit is a good optional addition.

For heavy bags the vertical sealer therefore comes with a heavy duty support stand and adjustable product support tray.

Picture is for information and show the similar manual option.

Power 1500w, Weight 50kg

Note. This machine is special order only please check the PSV605X2A
Vertical Heat Sealer 600mm Foot Pedal Operated Double Heat (packsealer.co.uk)

The PSV range of heavy duty sealers weigh 50kg therefore we deliver on a pallet.

Important note.

A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.

This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).

More information about Circuit Breakers

The post 450mm Vertical Heat Sealer Automatic Double Heat Foot Pedal Operated appeared first on PackSealer.

In automatic mode the sealer will close at preset intervals without the need to press the foot switch.
Picture is for information and show the similar manual option.

Power 1000w, Weight 55kg

The post 600mm Vertical Automatic Foot Pedal Sealer appeared first on PackSealer.

Size: 450mm Length x 5mm Seal width.
Pedestal mounted Impulse Sealer with foot switch, adjustable working height from 700mm to 900mm with an adjustable support shelf.
The vertical bag sealer is suitable for sealing bags that are required to kept upright like sacks for flowable product like liquids and powders or powders and bulky materials like gravel, aggregates or firewood.
Foot Switch Sealers provide a faster hands free sealing operation.
Supplied with stand, pedestal, adjustable worktable and spare element.
All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge). Approximately up to 10 packages can be sealed per minute.

In automatic mode the sealer will close at preset intervals without the need to press the foot switch.
Picture is for information and show the similar manual option.

Power 1000w, Weight 45kg

The post 450mm Vertical Heat Sealer appeared first on PackSealer.

PSF455X2A Double Automatic Foot Sealer | PackSealer

350mm Foot Pedal Operated Impulse Heat Sealer

Size: Seal width 350mm x 5mm Foot switch operated – standard working height 875mm.
Double Heat – with upper and lower heating elements
Foot Switch Sealers provide a faster hands free sealing operation.Supplied with stand, pedestal, adjustable worktable and spare element. All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 100μ (2 x 400 gauge) to 2 x 250μ (2 x 1000 gauge). Approximately up to 10 packages can be sealed per minute.
In automatic mode the sealer will close at preset intervals without the need to press the foot switch.
Supplied with stand, pedestal, adjustable worktable and spare element.

This sealer can be easily converted into a bench sealer buy purchasing a short stand tube.

Power 2000W  Weight 35 kg

Important note.

A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.

This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).

More information about Circuit Breakers

The post PSF355X2A Double Automatic Foot Sealer appeared first on PackSealer.

Foot Switch Sealers provide a faster hands free sealing operation.Supplied with stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge). Approximately up to 10 packages can be sealed per minute.In automatic mode the sealer will close at preset intervals without the need to press the foot switch.

This sealer can be easily converted into a bench sealer buy purchasing a short stand tube.
Power 1000w, Weight 25kg

The post PSF355A 350mm Automatic Foot Pedal Sealer appeared first on PackSealer.

Foot Switch Sealers provide a faster hands free sealing operation.Supplied with stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge).

Approximately up to 10 packages can be sealed per minute. In automatic mode the sealer will close at preset intervals without the need to press the foot switch.

This Automatic Foot Pedal Sealer can be easily converted into a bench sealer buy purchasing a short stand tube.

Power 1000w, Weight 35kg

Important note.

A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.

This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).

More information about Circuit Breakers

The post 450mm Automatic Foot Pedal Sealer appeared first on PackSealer.